CMC Vn-Wx Thermal Transfer Sublimation Powder for Sublimation Coating Application

CMC  Vn-Wx Thermal Transfer Sublimation Powder  for Sublimation Coating Application

Sticky Sublimation Coating Powder

Sticky sublimation coating powEPTis exclusively made and deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed for the elastic material transfer printing, to avoid the overlap of the sample, deformation and other problems of elastic cloth in the procedure of transfer, resulting in a really minimal pass charge of transfer printing
Attribute:
one.Throughout the transferring , the sticky coating powEPTcould be ready to stick the cloth and paper, but there is no glue residue on the cloth following stripping
2.The stickiness of the fabric and paper can be altered by the producer of the transfer paper unEPTthe tips of our company and the viscosity is much more secure, which can be saved for a EPT time.

Large Concentration Sublimation Coating Powder

For the existing large-speed coating EPTs, our company independently deveXiHu (West Lake) Dis.Hu (West Lake) Dis.s a solid content material of much more than 30% of the coating chemical-high focus coating powder. On the foundation of no escalating in charges, the coating speed could be signnificantly enhanced, and production capability will be doubled than the quickly-dry coating powders.
Attribute:

For large-speed coating EPT creation, coating manufacturer must have a mature coating engineering.

Fast-dry Sublimation Coating Powder

The formulation of the 1st generation of EPT sublimation transfer paper coating is widely used in the market, but steadily it cann’t be matched with the necessity of large-pace printer thanks to the large value, low manufacturing efficiency and sluggish drying of printing coating.
Characteristic:
Nano-induced secondary self-assembly strategies of this coating material , are significantly improved in the pursuing aspects:

one.The total expense of this quick-dry blended powEPTis lowered although the usability of the powEPTremains unchanged

two.This quick-dry coating powEPTcan increase the effectiveness of coating creation, and the manufacturing pace can be promoted by a lot more than 25%

3.Thanks to useful improvement, the printing drying rate of this product has been improved much more than a single time, and it can preserve massive quantity of electric powered powEPTfrom the baking lamp.

How to use our coating powder:

one.Adding proportional water into stirring tank, keep water temperature as same as room temperature.
two.Set EPT bag coating powEPTslowly into agitator whilst stirring, and maintain stirring until finally the chemical powEPTdissolving uniformly into h2o, no lump on the surface of liquid. The dissolution time relies upon on the approach of agitator.
three.EPTking some samples of doing assessments following dissolving, and get notes of glue temperature and corresponding viscosity, guarantee the experienced screening end result ahead of filtration.
4.Two times of filtration ahead of coating on EPT with 800-100mesh filter
five.The liquid glue stay on EPT is recyclable although coating. It need to be by way of filter screen once again and can be utilized in miXiHu (West Lake) Dis.ng with clean liquid coating substances.

Million-ton EPT Content(HangZhou) Co., LTD
Cindy

Internet site:

CMC  Vn-Wx Thermal Transfer Sublimation Powder  for Sublimation Coating Application

CMC  Vn-Wx Thermal Transfer Sublimation Powder  for Sublimation Coating Application

Leave a Reply

Your email address will not be published. Required fields are marked *