Liquid PU Binder for Door

Liquid PU Binder for Door

Adhesive is essential assistant material of anti-theft doorway, metal picket doors, polymer doorways, which refers to get in touch with with air curing one ingredient adhesive. With the characteristics of substantial bonding toughness, good weathering resistance, simple to use, drinking water resistance and so on, it is broadly employed in iron and metal, galvanized steel plate, wood construction and and many others.

Software Desc.:

Honeycomb paper (incXiHu (West Lake) Dis.Hu (West Lake) Dis. aluminum honeycomb paper, polymer honeycomb paper, and so on.) EPT foam glue. Employed in need filling unit bonding honeycomb paper and other paper goods.

Utilised for bonding fireproof board, honeycomb paper in gadgets this sort of as stability doorways, etc..

Bonding polystyrene foam board for use in devices this sort of as protection doors, and many others.

Functions:

one. Powerful adhesion, shear, high peel strength, higher and lower temperature resistance, hydrolysis resistance , heat resistance and aging resistance.

2. It can obtain optimum actual physical performance right after curing at room temperature and no degumming phenomenon in the approach of transfer printing of protection doorway.

three. The operational time adjustment is strong, it can be chosen according to the various time and different curing procedure of Styrofoam.

4. Lower toXiHu (West Lake) Dis.metropolis solvent, without having employing highly toXiHu (West Lake) Dis.c solvent to decrease fees.

Technological Index:

Viscosity(with 4 cups, 77 ordmF):one hundred-300s

Powerful compound contentL78+-three%

Usage:

one)Brushing approach: the surface area of the doing work item is pretreatment #8594brushing glue #8594agglutination #8594curing. Cleaning the adhesive surface of safety doorway to guarantee that no rust and no oil. It will impact the adhesion of Styrofoam if this part not be excellent handled.

two)In orEPTto make sure the power of the adhesive, spot the adhesive evenly coated scratch in the sticky floor. It really is much better to scrape with plastic toothed blade scraper, it can not use hairbrush brush glue due to the fact of substantial viscosity. The dosage of glue can be confirmed by the embossed depth of doorway. Brushing ought to not be as well thick, exposed time not as well EPT.

3)Shell out focus to speed the procedure of gluing, coating evenly. It require quickly pace in summer season, not brush back again and forth a lot of times. If the motion is slow, you can put strain in the glue EPT, will not wait for the surface glue has dried and then place pressure on. Agglutination can be handled by chilly pier or very hot pier, the minimal time of chilly pier is 3-4 hrs and the bare minimum time of very hot pier is fifteen-thirty minutes. The cement time more than 10 hours, it’s greater that the backing temperature is a hundred ninety ~ 220C deg.

4)Please seal use lid for the unused glue to keep away from curing crust. The thoroughly clean of equipment can use ethyl acetate solvent, or it can be soaked in heat drinking water for a few minutes, and then wash with cleaning soap. This merchandise should be stored in a dry, ventilated, sealed surroundings, make sure you do not contact the drinking water.

Consideration:

In the two procedure of brushing glue and stress on glue, it need to be finished in the area drying time that usually much less than 20 minutes .

EPT amp Delivery:

EPT Information 200kg/drum, 80 drums for a 20” container.
Shipping Time fifteen daEPTafter get

About us:
HangZhou XiHu (West Lake) Dis.hu (West Lake) Dis. Chemical Co., Ltd. is a single of the most significant adhesive manufacturers in China, EPTizes in the study, manufacture and advertising and marketing of different kinds of adhesives, incEPTd: H2o-Based Homo-Polyvinyl Acetate Emulsion Adhesive, Polyurethane adhesive, spray adhesive, speak to adhesive, footwear adhesive, wallpaper glue, and so on. OEM is offered right here.

Liquid PU Binder for Door

Liquid PU Binder for Door